| |
Battery problems?
Charging problems?
Electrical problems? |
Having essential information at a glance is the first step to solving them!
The ADVERC DCM MkIII does this and more.
Features:
- Up to 4 circuits can be monitored simultaneously.
- Voltage/Current displayed instantly.
- Can measure up to 199 amps.
- Large 4 digit display.
- Low voltage alarm, with audio visual functions.
- Adjustable threshold level provides ample time to react.
- Back lighting facility.
- Low power consumption - less than 5 mA.
- Compatible fascia plate - white legend on black traffolyte.
- Straightforward installation.
|
|
|
DCM MkIII (Digital Circuit Monitor)
Functions and Technical Data
SELECT FUNCTION
OFF:
|
DCM is off and draws no current.
|
ALARM ONLY:
|
The display will remain blank, but the low voltage facility will monitor the circuits that have been connected and activate the alarm function if the voltage falls below the preset value.
The SELECT CIRCUIT control enables you to determine which battery bank is low.
|
VOLTS:
|
The display will show the voltage on the circuit selected.
|
AMPS:
|
The display will show the charge or discharge current of the circuit selected.
|
SELECT CIRCUIT
Select which ever circuit is to be displayed
WARNING LOW VOLTAGE
When the voltage on any selected circuit falls below the preset value, the red lamp will light and the buzzer will sound. The buzzer may be turned off by pressing the mute button. However, the red lamp will only go out if the battery voltage is restored above its preset alarm voltage.
The low voltage threshold can be adjusted.
BACK LIGHT
This switch will activate the back light to make the display easier to read in low ambient light.
DIMENSIONS
|
Front Plate: 160mm x 80mm x 35mm. Hole centres: 150mm x 70mm. Cut-out dimensions: 140mm x 60mm nominal.
|
FRONT PANEL
|
Black traffolyte. - white legends.
|
SHUNTS
|
Shunts are required when measuring current. These are available in mounted form, if required.
|
|
